1701 Long Thin wrench 32mm
Especially for VW, BMW and Porsche.
Overall length is 15 inches to remove and install Fan Clutch assemblies when replacing Water Pumps or doing other engine service often use two wrenches together: one for holding, the other for turning
1702 Long Thin wrench 36mm
Especially for Mercedes
Fan Clutch Wrench Ford & GM vehicles Land Rover (Discovery 2)
with a 36mm fan clutch nut.
This tool is 1/4 inch thick.
Overall length is 15 inches.
FUELX4 Set essential for mechanics and car specialists to pinch fuel, vacuum, transmission, brake lines, heater lines and other fluid lines safely and easily.
Sizes 3/8 inch 1/2 inch, 1 inch, 1-3/4 inch
Item T10057 Most popular Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
142BG Universal Timing/Cam/Drive/V-Belt Tension Tensioning Gauge Tool For VW/Audi/Volvo -Timing belt tension checking tool for use on timing belts in vehicles where the manufacturer specifies that the timing belt tension be set according to newton-meters, at a specific location on the belts span between pulleys..
3316 Radio Removal Tool Set (2) for 1998 and newer Golf, Passat, Jetta and Beetle with thin slot on the bottom right and left.Also works on any VW In-Dash player that holds only one CD at a time. Note these keys will NOT work on any of the new Double-DIN
radios that have Radio and CD in one unit. Double check your manuals for number 3316.
T10060A Lock Pin for V-Belt. Superseded T10060 and 3204.
Appl: AEB, AEG, AHA, AKB, AMB, APB, APH, ART, ATQ, ATW, AUG, AUX, AVH, AWD, AWM AWN, AWP, AWV, AWW, AYS, AZG, BBD, BBW, BCY, BDC, BEV, BEW, BFM, BKF, BNU
T10011 Trunk Lock Special Tool USED WHEN REMOVING TRUNK LOCK CYL. HOUSING. This tool is XZN STYLE (12 point) driver especially for Volkswagen-Beetle. This is the correct tool for the job.
PINX6 Hydraulic Tensioner Pin Set
Timing belt tensioners need to be compressed during service.
Sizes: 0.8, 1.2, 1.4, 1.5, 1.8 and 1.9mm.
Made of hardened spring steel to hold the strongest tensioners .
5 PC Glow Plug Socket Set Specially designed for removal and replacement of glow plugs easily. Includes: 6, 8, 9, 10, 12, 14
(12-point tools/sockets)
3/8" Drive
14322 AIR BAG REMOVER FOR VW
Designed for dismantling the drivers air bag.
Application: 1999 –2004 new body style VW Passat, Jetta, Golf, and Beetle.
47422 OIL FILTER KEY FOR VW/AUDI VW, Audi oil filter key is used to remove the oil filter with special adapter. Appl: VW, Audi diesel engine with MANN, and Knecht filters.
Used with 1/2″ drive or 22mm wrench.
13033 OIL SCREW SOCKET FOR VW size M16TP economy type short socket allows the device to be used in confined spaces.
or use with a 17mm wrench.
Application: Vw, Audi oil screws.
16077 Split 22mm socket for oxygen sensors VW Audi located in the exhaust manifolds of 1981 and later cars and light trucks, including some VW. 3/8" drive 1/2" opening for easy access to oxygen sensor. Even if you’re not a gear head you can replace your O2 sensor with this tool.
Double End Wrench Set Mirror polished All-purpose tools do the work of socket wrenches, box end wrenches and/or nut drivers.
Sizes 10 x 11mm, 12 x 13mm, 14 x 15m,
16 x 17mm. Note: These are 12 point tools
600M7 Stubby Hex Socket Set Size 7mm
High quality tool made in Japan!
Impact quality short socket 1/4 drive size.
This tool is one inch long. Sturdy compact One-Piece design
MFW14X15
Thin Metric Wrench Size 14 x 15mm
- Overall length is 6.25 inches
- This tool is only 2.99 mm thick!
Super Thin for working in confined areas with limited access. (Pictures are for reference only). Alloy Steel with Satin Chrome Finish. This tool is thinner than most regular wrenches.
VIS1022
Security Hex Bit Set in plastic case
Magnetic power driver
and 1/4" square drive bit holder.
Bits are S2 steel, R/C 57/62 Full warranty
Sizes include 3/32" Thru 5/16
M00933 Oil Filter Wrench, inside square 10 mm (3/8 inch). 14-point. wrench size 74.mm. Oil Filter Wrench for the operation of oil filters and oil filter caps from Mann, Knecht and Opel , Audi cars since 12/2007, and VW since 2007 .
26794 6 Piece Precision
Pentalobe Screwdriver Set
sizes PL1, PL2, PL3, PL4, PL5, PL6 x 40mm, 120mm OAL. When it comes to working on small components and modern electronics,
Wiha Precision Screwdrivers are unrivaled.
3418T3 Set 3 pieces Diesel Timing Belt Tools
for for VW TDI 1.9 ALH Beetle Golf Jetta 98-06
Set includes number 3418 (plate), 3359 (lock pin) and 2587 pin wrench
for 1999 and Up engines with ALH code
found on Golf, Jetta and Beetle
3104 Jetta & Golf Shifter Alignment Tool
Jetta, Golf 4 Cyl. 85-99.5, Cabrio 95-00
This tool makes a hard job easy! It's used as a guide when setting up the shifter linkage.
A well aligned linkage can prevent major transmission damage down the road caused by mis-shifts.
T10008 Marking Plate / Tensioner
Engine Timing Tool Engine Code: VW-AEB ATW AMB AUG AWM tool to lock tension roller on adjustable types beginning with 8/2000 engine models For Hydraulic belt tension system pump injector engines and some 4cyl. Turbo 1,8 liter petrol engines
3371 Gap Adjustment Gauge
Set for checking and adjusting bumpers on hood lid and door seals.
White- 1.0 mm, Blue- 1.25 mm, Red- 1.5 mm, Yellow- 2.0 mm, Green- 2.5 mm,
Orange- 3.0 mm Black- 3.5 mm,
Grey- 4.0 mm Brown- 4.5 mm, Teal- 5.0 mm
A3088 Offset Valve Tappet Gauge Set. Speeds valve lash adjustment. Install the proper blades for intake and exhaust settings. Offset blades for easy insertion. Metric markings.
3369 Carrier Lock Pins Set
Application: for removing and installing lock carrier on hood when adjusting belts or servicing cylinder head Overall length is 3-5/8
4033 Dial Indicator with 8mm shank size (8mm crucial for fitting into most popular holders) Accurate to .01mm (more than adequate for the job).
MK-VT707 Small Engine Valve Tappet Depressor Tool 7.5 inches long
for pre-loading cam followers when exchanging valve adjusting shims. Email for more dimensions of this tool.
T10070 to remove and install cylinder head bolts on VW Audi. Drive size 1/2 inch
Long pattern socket for deep located screws.
Don't be stuck using the wrong tool.
T10070 is the correct current number.
XZN10HDL
Heavy Duty XZN size M10
Triple square tool 12 points for both early and late model 1.8T and 2.0 liter VW Audi gas engines. Heavy duty 1/2 drive tool.
MK15266
Three Piece Set
Strut Spreader Tool, Universal Steering Suspension Strut Knuckle Spreader Tools
Do not use power or air tools to drive these strut tools to prevent damage.
T10029
Spark Plug Wire tool remove wires from many VW/Audi VR5 or VR6 wire on plug ignition systems. This tool grabs each wire securely, to prevent damage.
T10006A
Specially designed to separate the brake service push rod from brake pedal. Application: Audi A4, VW Bora (1998-2008), VW Beetle, etc.
MK74OFW Filter Wrench 14 flute 74mm with 3/8" Drive Socket type filter remover for spin on oil filters and filter housings with side lock bolts to remove the most stubborn filters.
3268 Ruler For Camshaft Alignment
Golf Corrado Passat Turbo Arrangement
Applicable to VR-6 engines
with 2 valves per cylinder.
3151 Clutch Cable Fixture
OEM Factory Tool used to position the self adjusting clutch cable at transmission during assembly. Tool Made in Germany.
VW524 Special Pin Wrench Tool services FWD VW & Audi with top shock-retaining nut recessed inside the strut tower. Tool's center bore holds the strut shaft to keep from turning. Use with a 7/8" (22mm) socket
824A Angle type Plier- Spark Plug Boot Removal Tool. Offset jaws allow easy access to most spark plug boots. Protects against plug wire and boot separation. Vinyl coated jaw and handles assure gripping ability. For use only on automotive-type ignition systems
Three piece spark plug socket set.
Currently out of stock.
3366 Chain Adjuster
T10112 Spark Plug Wire Tool
3366 Chain Adjuster
2587 Pin Wrench
T10112 Spark Plug Wire Tool
3366 Chain Adjuster
T10112 Spark Plug Wire Tool
T10112 Spark Plug Wire Tool
T10112 Spark Plug Wire Tool