Signed in as:
filler@godaddy.com
44299TN
44299TN
Benz Diesel timing tool set is specially designed to align the camshaft timing angle to the correct position.
- Application: Benz M642 CDI engine.
- OEM ref number: 642 589 00 31 00..
4413TN
4413TN
Timing tool set is specially designed to position the camshaft in the TDC position.
Application: 1.6L, V4 engine, A class and B class.
- Engines: new and old M270, M133, M274 engine.
- Oem number: 270 589 00 6100, 270 589 01 6100.
M45433
M45433
Benz combination timing tool set is specially designed for aligning the camshaft, loosen, and insert the sprocket, and rotating the crankshaft, for aligning the camshaft, loosen and inserting the sprocket, and rotating the crankshaft. Helps prevent skipping of the chain during installation. If skipping does occur engine timing will need to be reset.
- Application: BENZ M651/ Models: 204 / 639 / 906.
- OEM ref numbers.: 60831800, 60831830, 60831820, 60831810
M1725
M1725
Dash & Ignition Tool Kit for Mercedes
Stainless steel tools for the easy removal of BMW and Mercedes
Models: W107, 123, 124, 126, 129, 140, 201
This 8-piece tool kit contains
- Ignition Lock Removal Pins - 124, 126, 201
- Dash Hooks -107, 116, 123, 124, 126, 140, 201
- Radio Removal Keys - 129, 140, 202, 210.
4848TN
4848TN
Engine timing tool set – Benz, Chrysler, Jeep covers many models in the Mercedes Benz range including gas and diesel engines.
-For gas engines 1.8, 2.0 and 2.3l (C-Class, E-Class, SLK)
-For diesel engines 2.0, 2.2, 2.7, 3.3, 4.0 Cdi, as well as 2.0, 2.2, 2.5, 2.9, 3.0 D and TD
- The set includes 1 Flywheel blocking tool, Including 2 x M6 x 90 mm
2 Camshaft locking pins - Suitable for Chrysler PT Cruiser 2.2 CRD and Jeep Grand Cherokee 2.7 CRD.
4476TN
4476TN
Benz interior chain link is specially designed for replacing the interior chain can install and feed the new chain to replace the broken chain and also revert.
1.Special tool set allows a clean separation, easy pulling and precise riveting timing chains
2.Industrial grade professional tool with precision machining, smooth thread and high quality. Use to press on external lugs and rivets of dip-type fasteners of simplex and duplex roller chain
3.Appl: Mercedes M271 M272 M273
M1123
M1123 Socket for Mercedes
IGNITION LOCK REMOVER
Special Tool to dismantle the retaining ring and remove the ignition switch on Mercedes-Benz
A must-have-tool for Mercedes mechanic, specifically designed to loosen and tighten the ring (rosette) that secures the ignition switch in Mercedes vehicles: W129, W140, W202, W210, W220, W203, W209, W211, W204.
M0109
M0109 33pt Injector Pump Socket
Special serrated socket
33 point serrated socket for Mercedes injection pump repair
For installing and removing the pressure valve holder on the MRSF-ERE injection pumps
MB diesel engines 601, 602, 603, 605, 606, 615, 616, 617, 1982 and up
1/2 inch drive, with an overall length of 2.18 inches.
Same as Benz ref tool # 617-589-0109-00
3400XT50
3400XT50 Socket Set 2 Tools
Set consisting of a 19mm Multi-spline short socket and a long Torx T50 Torx tool
Some manuals describe this procedure as "mounting and dismounting" the alternator pulley or V-belt at the alternator/for Mercedes for removal and replacement of free-wheel drive pulleys on 1998 & up Benz, including 606 (210), 648 (211, 164), 642 (211, 164) Mercedes E300 1996 -1999. The long tool is a Torx T50 and and is 3/8 drive and 4 inch overall length used to hold the alternator shaft when replacing the belts the area between the alternator and car body is very limited. You will get both tools with this purchase.
M1332
M1332
CRANKSHAFT ALIGNMENT TOOL FOR BENZ
Holds the camshaft in 40 degree. TDC position (left / right side)
38mm special wrench for turning the cam
Appl: 1998 and newer Mercedes with V6 and V8 engines M112, M113
Mercedes:1998-2000 C,1998-2005 SLK, 1998-2004 CLK, 1998-2005 E,
1999-2005 SL,2000-2006 S,1998-2005 ML,2000-present G
MK909
MK909
Transmission Linkage Bushing Installer
(Bushings Not Included)
Save yourself headaches & time with this innovative tool,
that will easily and safely push tough nylon bushings into place.
For Mercedes with automatic transmissions, all years, some Ford models and others.
Works on different bushing sizes.
Overall Length: 10".
4718TN
4718TN
Common rail injector puller is used for removing tight common rail injectors without having to disassemble the cylinder head.
- Injection puller with impact hammer, injection nozzles that do not fit tightly can be pulled out without needing to take them apart or remove the cylinder.
- Application: Benz CDI 611, 612, 613, 646, 647, 648, etc. diesel engines.
- Contents: 3 adapters: M17 x 1.0, M27 x 1.0 (Bosch), M12 x 1.75..
NUMBER STRT55
The kit includes 5 different sizes sockets for different cars, such as replacement for Benz C‑Class W203 W209 CLK.
Golf, Golf I Cabriolet Scirocco Caddy Golf III, Jetta Vento Passat since 1988
Audi 80 since 1987 Polo 1982
High Efficiency: Strut nut socket can be used in conjunction with a 22mm spanner, helping you to do the repair work efficiently.
Usage: Shock absorber strut nut socket is designed to hold damper shaft during the refitting and removal of the strut nuts.
Socket Sizes: 10.5 x 3.5, 12.5 x 3.5, 14 x 2.5, 14.5 x 3, 14.5 x 5
NUMBER MK74OFW
74mm Filter Wrench 14 flute with 3/8" Drive Socket type filter remover for spin on oil filters and filter housings with side lock bolts to remove the most stubborn filters. Should work in place of Mercedes numbers: 103 589 02 09 00
and 103 589 00 09 00.. Picture is for reference only - may not be exact tool sent
(color may vary AND STYLE MAY VARY SLIGHTLY)
Appl: Some M102, 103, 104, 111, 112, 113, 119, 120, 137, 155, 275, 285, 611, 612, 613, 628, 646, 648
M1313
MK1313
Mercedes-Benz and BMW Fan Clutch Service Kit
- Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan
- BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan. Works on BMW M10, M20, M30, & other late model vehicles. (holes at 38 mm & 44.5 mm)
- Mercedes-Benz fan clutch wrench removes the thermal-viscous radiator fans found on Mercedes-Benz and Ford vehicles. Works on M-B engines: M111, OM604, OM605, and OM606 (C & E Class; 36 mm opening).
- Mercedes-Benz fan clutch wrench is used to remove or install the fan clutch assembly. Slim shaft handle lets you easily work in tight spaces. Works on M-B engines: M103, M104, M119, and M120 (65 mm opening)
- BMW fan clutch wrench is used to remove and install the thermal-viscous fan on BMW and Fords (32 mm opening)
- Mercedes-Benz Fan Clutch Holding Tool is used to remove/replace thermal-viscous fan coupling with the radiator in place
- Universal fan belt adjustment wrench services Mercedes-Benz, Nissan Quest, and Mercury Villager radiator fans and pulley belts. It also can be used for loosening the A/C idler pulley tension lock nuts for A/C belt adjustment or replacement.
- Also contains 2.5 mm, 8 mm, and 10 mm Allen keys.