www.TOOLSS.com
MK-PRE80
($8.50 shipping)
ITEM MK-PRC80
Piston Ring Expanding Tool has a universal design that can be used on a variety of vehicles. Ergonomic grip and handle enhance comfort and control while reducing fatigue. Limited Lifetime Warranty against manufacturer defects. Meets or exceeds the standards established by the ANSI. This Tool has a capacity of 80 to 100 millimeters.
ITEM T10050SET6
VAG special tool kit 6 piece set for TDI
Timing Tool Set for VAG 2.0Litre TDi PD DOHC engines fitted to Audi A3/A4/A5/A6,
Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta and Touran models.
Also found on the Ford Galaxy models with ASZ and ASZ1 VAG engines.
Set includes Crankshaft Pulley Locking Tools T10050 for round sprockets at 12 o'Clock position and oval sprockets (T10100) at 1 o'Clock position.
ITEM 2587SET3
Special 3 Piece Wrench Set
Includes 2587, 3387 and T10020 set 3 Pin wrenches turn the belt tensioner roller and to tension the timing belt.3 x double pin wrenches 90 degree pin, Triangular pin, Half Circle pin.
upplied in blow molded case
ITEM MKBRK-J
Disc Brake Piston Reset Tool - Brake Press Tool
Very STURDY tool for the safe resetting of disc brake pistons on vehicles with fixed caliper disc brakes / for putting the pistons back into the housing.
Tool is approximately 2 5/8" HEIGHT PLATE TO PLATE (top to bottom)
each plate is approx 6.5mm thick depth of tool front to back (inside) is 2 3/4 inches (69.85mm).
ITEM H1231C
Ignition coil puller set suitable for installation and removal of ignition coils compatible with Audi and Volkswagen VAG vehicles with direct ignition engines.
T- Handle style handle for added control and stability- revents damage to ignition coils while allowing for faster removal.
ITEM 4033X2
Metric Dial Indicator Set with Holder Tools
For use on Bosch diesel injection systems,
Includes Dial Indicator, holder plus extension pins (2) with M8, M10, and M12 adapters.
The Indicator has an 8mm shank/stem size, crucial for fitting into most popular holders.
Accurate to .01mm (more than adequate for the job).
ITEM H1717
11 Piece Valve Seal Remover and Installer Kit
For valves in place or removed from heads on automotive, motorcycle, marine, and power sports engines. Valve seal removal tool is used to pull old valve seals and install new seals on overhead camshaft engines
ITEM 47500
Adjustable Universal Flywheel Locking Tool.
Specially designed to lock the flywheel when the gearbox is dismounted․
The tool can be adjusted axially and radically for almost universally by screwing in different stud bolts. Using range: 92-107mm
ITEM 1867-T7
Air bag removal tool is made of high-quality materials and has the characteristics of durability, stability, sturdiness and long service life. It is one of the high-quality choices for replacing old parts in European vehicles.
ITEM 4491A227
Two Tools including 22mm Strut removal Socket 1/2 Inch drive plus 7mm Allen wrench.
This 22mm socket with cut-away is designed to allow for the easy removal and installation of the strut assembly. It makes the job easier by holding the nut while the strut shaft is turned with an Allen wrench.
ITEM 4491ATH
Deep 22mm strut nut Thin-wall socket forgetting into confined areas.
To secure shocks and struts to their mounts, the retaining nut must be
torqued to its proper specification using a torque wrench. Strut nut sockets
allow for the use of an Allen wrench to hold the damper shaft while utilizing
your torque wrench on the socket to achieve proper torque.
An improper torque value may result in premature mount failure -
ITEM HB505
Mini Ratchet 1/4" Square Drive & Bit Wrench
All in One, Convenient Low profle Ratchet
The quick-disk on the drive head allows for quick tightening or loosening of fasteners
when ratcheting is not required. Reversible 52-tooth gear head requires only 7 degrees of sweep.
Polished Chrome - Heat Treated Alloy Steel. Works with 1/4 Hex Bits & 1/4 Drive Sockets.
Made in Taiwan
ITEM H2587
Pin Wrench same as old VW Number V159
High quality tool made in Germany!
This is the pin wrench needed to adjust the timing belt tensioner pulleys on VW/Audi 4 cylinder
gas and diesel 1.5, 1.6, 1.7, 1.8, 1.9 and 2.0 liter engines from approximately 1979 to 1997 and later, or earlier engines which have had the later style timing belt tensioner pulley installed.
Distance between Pins 18mm.
ITEM H630/8
8 Piece Deep Offset Wrench Set
High quality tools made in Germany!
Hazet Number 630/8
HAZET has been a symbol of quality since 1868, known for their precision wrenches
Deep cranked thin-walled heads, Surface: chrome-plated, heads polished.
DIN 838, ISO 10104.
Made in Germany. 12-point profile.
Wrench sizes: 6 x 7 – 27 x 32 V
ITEM T40030SET6
Camshaft alignment timing tools includes a pin for locating the crankshaft at (TDC) when timing the engine or servicing the timing belt, flywheel, or drive plate, as well as a special 3/8" Drive Socket Applicable: Audi 3.0L V6 5V, used in 2002-2005 Audi A4 and 2002-2004 Audi
ITEM 3212SET5
VW Tool Lot includes Pin Spanner same as 3212
For Viscous Fan VW Volkswagen Audi repair work
Pin Spanner for Viscous Fan & Central Hydraulic Pump Tool same as VAG 3212
Corrosion and oil resistant black phosphate finish.
Also for use on machine tool equipment, adjustable rollers, seal and packing nuts, collars & more.. You get all five tools with this purchase.