MORE PORSCHE AND VW TOOLS

---

41722 Timing tool set for locking and adjusting the camshaft

Application: VAG 2.7 / 3.0 TDI V6 and 4.0 / 4.2 TDI V8 engine chain drive; 

Audi A4, A5, A6, A8, Q5, Q7 diesel engine; VW 

49288 Timing tool set is specially designed for alignment, locking, and adjusting camshaft. Appl: VAG A4 / A6 / A8 3.2 FSI with engine AUK, A6L 

Quattro 2.4 with engine BDW.

40877 Popular timing tool set is used for alignment, adjustment of the camshaft, replacement of the timing chain, etc.

VAG A4 / A6 / A8 / Q7 / R8 3.2 FSI with AUK engine; А6L / Quattro 2,4 with BDW engine.

47399A  Master timing set VW, Audi is a  comprehensive set which can correct the  timing unit when replacing the timing belt of gas and diesel engines. Appl: Audi A4, A6, A8, A11 (97 – 08), and VW since 98.

Engine codes: AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC, etc

49311  Diesel engine timing set is used for removing and installing camshaft drive gear, and eliminating play in gear train – for locking of both camshaft and crankshaft. Appl: VW T5 Touareg and Transporter 2.5 TDI PD and 4.9D / TDI models.

BAC, BLK, BPD, AXD, AXE, BLJ, BPC, and AYH

48477 VW timing set with cam tools, chain tensioner, locking pins, and tensioner bolt for 2.0 FSI gas engines since 2003 Audi A3 2.0 FSI and FSI SOHC;  AWA, BHD, BMB.

Golf 2.0 FSI and FSI SOHC, Touran 2.0 FSI SOHC; Engine : AWA, AXW

40511 Injector seat cleaning set is designed to clean the contact surface between the injector and engine head when making the replacement. Suitable for 2.0 TDI engine  

41522 Diesel injector remover kit is specially designed to remove the seized diesel injector from VAG TDI engines.

Appl: VAG TDI 1.6 (2010 >), and 2.0 (2011 >)

49300 Diesel engine timing tool set is specially designed for camshaft locking and adjusting. Application: VW Transporter, LT, Crafter. Engines: 2.4D, 2.5SDI, 2.5TDI, 2.5TDI Common Rail.

46733  VW Audi camshaft alignment tool  specifically designed to set the camshaft in the correct position. Application: VW Passat (98 – 04); Audi A4, A6, A8, Allroad (97 – 08).

47699 Timing tool set is for installation and removal of the camshaft / variable camshaft timing unit. To check and adjust the timing. 

 1.2L engine, 2 and 3-cylinder, 6 / 12V.

Ref : T10123, T10122, T10120, T10121

40833 Specially designed to remove and install the clutch of the gearbox.

Application: for vehicles with a 7-speed transmission gearbox (code 0AM) 

For VW Golf and the 2005, VW Touareg 2003 

44122 VAG timing tool set is specially designed for camshaft alignment locking and adjusting. To take and plug-on of the ignition coil off with power-output stage at VW, Audi fuel injection engines. Application: VAG series VW, Audi; 1.8L, 2.0L, FSI TSI TFSI engine.

43822 VAG timing tool set used to correct the camshaft and crankshaft timing position. Application: 2006 -2013 VAG series 

Reference numbers: T10352, / 1, / 2, T10368, T40196, T10354, T10060A, T40011, T40098, T40267, T40271.

48311 VAG timing tool set is used for correcting the camshaft and crankshaft timing position while changing the timing belt. Application: VAG series EA211 FSI, TSI, TFSI engine (1.0L, 1.2L, 1.4L, and 1.6L).

Ref numbers: T10340, T10494, T10499, 

46799 Diesel fuel pump timing set is specially designed to reset the timing position on the diesel engine with fuel pump. Application:  Alfa Romeo, Audi, BMW, Fiat, Ford, Isuzu, Iveco, Lancia, Land Rover,  Mazda Mitsubishi, Nissan, Renault, Rover, VW, etc

69877  Set is specially designed to fix the camshafts in position when removing and installing the camshaft timing chains. Application: Porsche, Audi, VW 2.9TFSI, 3.0TFSI EA839 engine (2016-)

Ref: T40331, T90000, T90001, T90002.

44111 VAG series timing tool set is specially designed for alignment camshaft locking and adjusting. Comes with a dial indicator to correct the timing position of the camshaft.

Application: VAG series VW, Audi, Skoda, Seat, etc; 1.2, 1.4, 1.6, 2.0, 2.4, 3.2 FSI engine.

43300  VAG engine timing tool set is specially designed for camshaft locking and adjusting.

Audi, VW, Seat 1.6, 2.0 TDi engine from 2007.

Engine codes: FCA, CAAA, CAAB, CAAC, CAYB, CAYC, CAGA, CAHA, CAGB, CAHB, CAGC,  

41700 This tool set is for setting camshaft timing on Porsche Boxster (2003-2008), Cayman (2006-2008) and 911 Carrera (2002-2008)  models with 3-chain engines. 

68633 Timing chain adjuster is used to adjust the tension of the chain by pneumatic.

• Application: Porsche 911, 993, 964, 996 (GT3). Ref number 9401.

44055 Porsche diesel engine timing tool set  to fix the camshaft in TDC position. TDI 1.2, 1.6, 2.0, 2.7, 3.0 and 4.0 liters, 4-valve, 8-cyl CAGA, CAGB, CAGC, САНА, САНВ, CFHC, СВАА, СВАВ, CFFB, CGLA,  CGLB, CJCA, CJCB, 

67788 Tool set specially designed to align the camshaft timing angle to the correct position. Used to rotate the camshaft timing gear oil pressure regulator. 

PORSCHE VEHICLES (3.0/3.6 L)

41566a Porsche tool Set enables to correct engine timing to be made when replacing the timing belt. Used to adjust the chain on V8 engine. Appl: Porsche Cayenne V8 4.5L, 4.8L; Panamera V6 3.6L.

68499T Rear Crankshaft Seal Installer Kit

Used when assembling PTFE crankshaft seals on the fly wheel end. Applicable: VW/ Audi 1.8L Turbo, 2.0L Turbo (CCTA, CBFA), 3.0L  Supercharged V6 (CCAA, CGXB, CTUB), 3.2L (BKH), 4.0L, 4.2L (BNK, BVJ)  engines.

4577T Set for alignment camshaft locking and adjusting. Applicable: AUDI, SEAT, SKODA, VW, Post 2012 1.6 & 2.0 TDI Common Rail Diesel Engine code: 2.0 LT CKFB, CKFC, CRBC, CRBD, CRCC, CRFA, CRFC, CRLB,  CRLC, CRMB, 

44233 Special Porsche engine tools set to rotate and align 

the crankshaft and camshaft. 

Application: 

Porsche 987, 981, 997, 991 flat engine.

PNA Ref numbers: 9772, 9773.

40300 Camshaft tool set enables to correct the timing to be made when replacing the timing belt. Application: M97 / 01 engine of Porsche Cayenne

40311 Two piece set Camshaft timing tools enables user to correct the engine timing to when replacing the timing belt. Application: Porsche Cayenne 3.6, 4.5 L, 4.8 L Audi Q7

4422T Engine Support for removing and installing engine.

Applicable: PORSCHE F6 series (2006~)

PNA Ref number 9769.