Signed in as:
filler@godaddy.com
NUMBER 1701T2
Long Thin wrench Set 32mm and 36mm
Especially for VW, BMW, Merceders and Porsche.
Ford & GM vehicles Land Rover (Discovery 2)
Overall length 15 inches to remove and install Fan Clutch assemblies when replacing Water Pumps or doing other engine service
Each tool is 1/4 inch thick.
NUMBER EH2429LG
7 Piece Security 5 Point Star (Torx) Sockets
Set includes hard to find small sizes:
TS15, TS20, TS25, TS27, TS30, TS40 and TS50
Torx 5 Point Security (with hole in the tip)
Comes on a rail.
Note: These tools Do NOT work in a standard torx fasteners.
These are 5 Point Star. Some German tool books call this style IPR or Penta.
Number A3088 Gauge Set
11-Blades High Quality Offset Valve Tappet Gauge Set
with Two Handles (0.004" to 0.014")
The handle is made of high quality steel and rubber, rubber allows you to work with less injuries, the blade is also made of steel, steel ensures that the tool is durable and set accurately when adjusting valve lash.
Easy to Use. The Offset Valve Tappet Gauge Set features 2-Handles and 11 Blades.
NUMBER U11MC
6 POINT TORX BIT SET PLUS MINI RATCHET includes mainly tamper-proof Torx.
The seven bits on the left side are tamper-proof, plus this set comes with
a number #1 and number #2 Phillips and a Flat-Head bit.
The Torx sizes are: T10, T15, T20, T25, T30, T40
NUMBER M10MRIBE
Ribe Socket size 10mm rare and hard to find.
Ribe tools are often used in body connecting bolts and sometimes found on old brake assemblies. This sale is for size 10mm only. This tool is not a Polydrive or Torx, it is called Ribe and the pattern will vary slightly from a Polydrive. Heavy duty 1/2 Drive with Bit made of S2 Steel
This tool is 5.5 inches long overall. Not intended for impact use.
Ribe are sometimes used Italian cars, Fiat, Lancia, Alfa Romeo etc.
Note: VW Audi headbolts are not Ribe, they are normally called Polydrive.
NUMBER 4033X2
Metric Dial Indicator Set with Holder
For use on Bosch diesel injection systems,
Includes Dial Indicator, holder plus extension pins (2)
with M8, M10, and M12 adapters.
The Indicator has an 8mm shank/stem size, crucial for fitting into most popular holders.
Accurate to .01mm (more than adequate for the job).
XZN116MH
NUMBER XZN116MH
This is size M16 Tamper-proof style Transmission Drain Plug Socket
With a Hole in the Tip
Similar to OEM number 3357
XZN 16mm Triple-square (12 POINT) Socket
3/8 Drive size For use on Transmissions that have a tamper-proof drain plug.
Only 1.5 inches long for working in confined areas.
NUMBER MK747VA
10mm Valve Adjustment Tool
Jam Nut, Slotted Valve Grinding & Lapping Tool,
Valve Adjusting Stud, Jam Nuts with Window Cut Out
This is a 10mm valve adjustment tool with side handle that provides extra leverage for loosening tight jam nuts. Compact and practical, this tool is an essential addition to your auto repair kit
Terminal Tool 45066
45066
Terminal Tool-Connector Removal Tool
For removal of many VAG and Porsche push & pull connectors, fits directly onto the push and pull connectors.
2.Used with MAF sensors, coil packs, headlights/fog lights, level sensors, MAP sensors etc. For: VAG VW AUDI Porsche
Size: 93 X 80mm
Item 90533 Terminal Release Kit
Kit Contains 22 styles and sizes to fit most domestic and imported cars, trucks, motorcycles, computer wiring harnesses and power supply connector plugs
Remove connector pins safely without damaging wiring harness or terminal block
Simply pushing the tool into the front (connector side) and pull the pin and wire from the back (wire side) All 22 tools are made of flexible 301 stainless steel with round rubber coated handles.
Also included is a compact Delphi Weather Pack style release tool with fully molded easy grip handle Sizes include: 7pcs Single Pin Extractor from 0.8 to 2.0mm, 9pcs Double Pin Extractor from 2 to 8mm, 5pcs Casing Tool from 2.0 to 4.9mm I.D.
Spring Clips VW171
VW171
Set (2) Spring Clips
Two tools for securing cam followers within crank case half during assembly.
Fits: Porsche 914-4 1.8 (1974-1975) 1.8L, Porsche 914-4 2.0 (1973-1976) 2.0L,
Porsche 912 (1965-1969) 1.6L, Porsche 356A (1956-1959), Porsche 912E (1976) 2.0L,
Porsche 356C/SC (1964-1965), Porsche 356B (1960-1963)
All VW air-cooled engines.
46966
VW, Audi diesel injection pump wrench is designed to fasten screws
at the injection pump when replacing the toothed belt or
adjusting the injection start.
Application: Audi 80 1.6 4-cylinder diesel engine; VW Golf,
Jetta, Caddy, Passat, and Santana. Size: 13 mm x 12 PT..
NUMBER 3366
Bracket for Chain Adjustment
tool threads into the guide, compressing the tensioner, relieving chain tension.
The no-mar plastic contact surface will not harm the tensioner face.
Applicable: ADR, AEB, AFY, AGN, AGU, AJH, AJL, AJP, AJQ, AMB, AMK, ANB, APG,
APP, APT, APU, APX, ARH, ARK, ARX, ARY, ARZ, AUG, AUM, AUQ,
AVC, AWC, AWM, AWP, AWT, AWU, AWV, AYP
NUMBER MK-6PIN
Hydraulic Tensioner Pin Set
Timing belt tensioners need to be compressed during service.
Sizes: 0.8, 1.2, 1.4, 1.5, 1.8 and 1.9mm.
Made of hardened spring steel to hold the strongest tensioners .
NUMBER T10011
Trunk Lock Special Tool
FOR REMOVING TRUNK LOCK CYL. HOUSING.
This tool is XZN STYLE (12 point) driver especially for Volkswagen-Beetle.
This is the correct tool for the job.
Made in Taiwan.
3316SET4
Radio Removal Tool Set (4)
For 1998 and newer Golf, Passat, Jetta and Beetle with thin slot on the bottom right and left.Also works on any VW In-Dash player that holds only one CD at a time. Note these keys will NOT work on any of the new Double-DIN
radios that have Radio and CD in one unit.
Double check your manuals for number 3316
You get all four pieces with this set.
T10006A
Specially designed to separate the brake service push rod from brake pedal. Application: Audi A4, VW Bora (1998-2008), VW Beetle, etc.
MK15266
Three Piece Set
Strut Spreader Tool, Universal Steering Suspension Strut Knuckle Spreader Tools
Do not use power or air tools to drive these strut tools to prevent damage.