Signed in as:
filler@godaddy.com
NUMBER STRT55
The kit includes 5 different sizes sockets for different cars, such as replacement for Benz C‑Class W203 W209 CLK.
Golf, Golf I Cabriolet Scirocco Caddy Golf III, Jetta Vento Passat since 1988
Audi 80 since 1987 Polo 1982
High Efficiency: Strut nut socket can be used in conjunction with a 22mm spanner, helping you to do the repair work efficiently.
Usage: Shock absorber strut nut socket is designed to hold damper shaft during the refitting and removal of the strut nuts.
Socket Sizes: 10.5 x 3.5, 12.5 x 3.5, 14 x 2.5, 14.5 x 3, 14.5 x 5
T10029
Spark Plug Wire tool remove wires from many VW/Audi VR5 or VR6 wire on plug ignition systems. This tool grabs each wire securely, to prevent damage.
MK74OFW Filter Wrench 14 flute 74mm with 3/8" Drive Socket type filter remover for spin on oil filters and filter housings with side lock bolts to remove the most stubborn filters.
3151 Clutch Cable Fixture
OEM Factory Tool used to position the self adjusting clutch cable at transmission during assembly. Tool Made in Germany.
3909X4
Double End Wrench Set Mirror polished All-purpose tools do the work of socket wrenches, box end wrenches and/or nut drivers.
Sizes 10 x 11mm, 12 x 13mm, 14 x 15m,
16 x 17mm. Note: These are 12 point tools
26794 6 Piece Precision
Pentalobe Screwdriver Set
sizes PL1, PL2, PL3, PL4, PL5, PL6 x 40mm, 120mm OAL.
When it comes to working on small components and modern electronics,
Wiha Precision Screwdrivers are unrivaled.
16077 Split 22mm socket for oxygen sensors VW Audi located in the exhaust manifolds of 1981 and later cars and light trucks, including some VW. 3/8" drive 1/2" opening for easy access to oxygen sensor. Even if you’re not a gear head you can replace your O2 sensor with this tool.
NUMBER 600HEX7
Stubby Hex Socket Set Size 7mm
High quality tool made in Japan!
Impact quality short socket 1/4 drive size.
This tool is one inch long.
Sturdy compact One-Piece design
S2 Alloy Steel. Fully Heat Treated to 56 to 62 RC - some of the strongest drivers available! For working in confined areas, bicycles, motorcycles or cars.
Great for tight engine bays on VW, BMW's and other European vehicles
FUELX4 Set essential for mechanics and car specialists to pinch fuel, vacuum, transmission, brake lines, heater lines and other fluid lines safely and easily.
Sizes 3/8 inch 1/2 inch, 1 inch, 1-3/4 inch
NUMBER 3316
Radio Removal Tool Set (2)
For 1998 and newer Golf, Passat, Jetta and Beetle with thin slot on the bottom right and left.Also works on any VW In-Dash player that holds only one CD at a time. Note these keys will NOT work on any of the new Double-DIN radios that have Radio and CD in one unit. Double check your manuals for number 3316.
NUMBER HOOKSET2
Exhaust Pulling Hook Set
Set Two Tools (2) Hooks with Special design to pull the rubber ring which is connected with the exhaust tube. You get both tools with this purchase.
• Invaluable when installing exhaust systems.
• T-handled tools allow easy fitting of exhaust mounts.
• 90° and 120° Hooks to suit block and ring mounts respectively.
Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. 90° and 120° Hooks to suit block and ring mounts respectively.
NUMBER HOOKSET2
Exhaust Pulling Hook Set
Set Two Tools (2) Hooks with Special design to pull the rubber ring which is connected with the exhaust tube. You get both tools with this purchase.
• Invaluable when installing exhaust systems.
• T-handled tools allow easy fitting of exhaust mounts.
• 90° and 120° Hooks to suit block and ring mounts respectively.
Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. 90° and 120° Hooks to suit block and ring mounts respectively.
NUMBER 15PCDRIVER
15 pc. Precision Screwdriver Set
Repair electronics and other small items using these Precision drivers.
Complete with an assortment of 15 small screwdrivers, this set prepares you for working on a wide range of fasteners.
The screwdrivers all feature chrome-vanadium steel blades and nonslip handles for efficient use.
Three piece spark plug socket set.
Currently out of stock.
824A Angle type Plier- Spark Plug Boot Removal Tool. Offset jaws allow easy access to most spark plug boots. Protects against plug wire and boot separation. Vinyl coated jaw and handles assure gripping ability. For use only on automotive-type ignition systems
FUELX4 Set essential for mechanics and car specialists to pinch fuel, vacuum, transmission, brake lines, heater lines and other fluid lines safely and easily.
Sizes 3/8 inch 1/2 inch, 1 inch, 1-3/4 inch
VIS1022
Security Hex Bit Set in plastic case
Magnetic power driver
and 1/4" square drive bit holder.
Bits are S2 steel, R/C 57/62 Full warranty
Sizes include 3/32" Thru 5/16
NUMBER 3104
Jetta & Golf Shifter Alignment Tool
Jetta, Golf 4 Cyl. 85-99.5, Cabrio 95-00
This tool makes a hard job easy! It's used as a guide when setting up the shifter linkage.
A well aligned linkage can prevent major transmission damage caused by mis-shifts.
NUMBER T10008
Marking Plate / Tensioner
VW-AEB ATW AMB AUG AWM
To lock tension roller on adjustable types beginning with 8/2000 engine models For Hydraulic belt tension system pump injector engines and some 4cyl. Turbo 1,8 liter petrol engines
NUMBER 3371
Gap Adjustment Gauge
For checking and bumpers on hood lid
and door seals.
White- 1.0 mm, Blue- 1.25 mm, Red- 1.5 mm, Yellow- 2.0 mm, Green- 2.5 mm,
Orange- 3.0 mm Black- 3.5 mm,
Grey- 4.0 mm Brown- 4.5 mm, Teal- 5.0 mm
NUMBER A3088 Offset Valve Tappet Gauge Set. Speeds valve lash adjustment. Install the proper blades for intake and exhaust settings. Offset blades for easy insertion. Metric markings.
NUMBER 3369 Carrier Lock Pins Set
Application: for removing and installing lock carrier on hood when adjusting belts or servicing cylinder head Overall length is 3-5/8
NUMBER 4033 Dial Indicator with 8mm shank size (8mm crucial for fitting into most popular holders) Accurate to .01mm (more than adequate for the job).
NUMBER MV7477 Small Engine Valve Tappet Depressor Tool 7.5 inches long
for pre-loading cam followers when exchanging valve adjusting shims. Email for more dimensions of this tool.
NUMBER T10070 to remove and install cylinder head bolts on VW Audi.
Drive size 1/2 inch
Long pattern socket for deep located screws.
Don't be stuck using the wrong tool.
T10070 is the correct current number.
NUMBER XZN10HDL
Heavy Duty XZN size M10
Triple square tool 12 points for both early and late model 1.8T and 2.0 liter VW Audi gas engines. Heavy duty 1/2 drive tool.