Signed in as:
filler@godaddy.com
NUMBER BMW112250
Special Socket for BMW Head Bolts
This is a number E12 Torx BMW Head Bolt Wrench/Socket.
Key Details: Type: E12 external Torx socket(designed for external Torx-style fasteners, sometimes called "female Torx" or "E-Torx").
Drive size: 1/2-inch square drive
Length: Extended shaft, typically 6 inches (15 cm) long — some listings note around 7-3/4 inches overall for better reach and torque handling.
Primary use: Specifically fits and removes cylinder head bolts on certain BMW engines, including:M42 (1.8L)
M50 (2.5L)
Additional compatibility: Often works on a broader range of BMW engines with similar E12 head bolts (e.g., M10, M20, M30, M44, M52, M54, M60, M62, and others in various 3 Series, 5 Series, etc. models — check exact engine fitment for your vehicle).
Features: Thin-wall design for access in tight spaces, sometimes described with a special lock ball for secure fit on the bolt.
NUMBER BMWRAD1
Pentagon-shaped BMW radio removal tool (also called a pentagon or 5-sided wrench) is a specialized tool used for removing certain factory BMW car radios, particularly those with anti-theft features.
This tool has a unique pentagonal (5-sided) head instead of the more common hex (6-sided) or square shapes. It fits into special pentagon-shaped security screws or bolts on the radio unit. These screws are often found on the sides or front face of the radio/head unit in various BMW models, especially older ones with factory anti-theft radios (like Becker or Alpine units). Designed to prevent easy theft or unauthorized removal, where a standard screwdriver or Allen key won't fit properly.
Primarily for BMW models from the 1990s to early 2000s (e.g., E38/E39 7 Series for some newer versions, but also E36, E46 3 Series, E34 5 Series, and others depending on the radio type).
Used to loosen the security screws that hold the radio in the dash.
Note: Not all BMW radios use this—many E46-era or later units use standard DIN removal keys (wire U-shaped tools) instead, so check your specific model and radio.
NUMBER 1088-00
VW/AUDI Bolt Socket Set
Type Bolt Socket Set
Drive Size 1/2 Inch Square (Metal Rail)
Finish Chrome Vanadium
Used On Triangular Profile, Tamperproof Fixings on Volkswagen/Audi TDI Engine, Bosch Injector
Set Contents (1) (M5) 8 Millimeter, (1) (M6) 10 Millimeter, (1) (M8) 12 Millimeter, (1) (M10) 15 Millimeter, (1) (M12) 16.5 Millimeter Bolt Socket
Designed to fit triangular profile, tamperproof fixings on Volkswagen/Audi Tdi engines, Bosch injector, and other light fittings
Replace pump seals, or adjust VW TDi injection pump timing on all TDi injection pumps from 1996-2003
Allows access to fuel temperature sensor by removing screws on top pump cover
NUMBER CLU-NISSAN4
Four Clutch Tools for Nissan Made in the U.S.A.
ON SALE!
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, or foreign and domestic auto repair shops.
The only clutch alignment tools with "U.S.A." stamped on every handle.
Pictures are for reference only
Quality Tools. Durable, long lasting and inexpensive.
Some applications include the following: (and many, many more models)
Model Cyl Ltr Year
Infiniti G20 4 2.0 1991-96
Infiniti G20 4 2.0 1999-02
Nissan 310 4 1.5 1982
Nissan NX Coupe 4 2.0 1991-94
Nissan Sentra 4 1.7 1982-92
Nissan Sentra 4 1.8 2000-01
Nissan Sentra 4 2.0 1991-00
Nissan Stanza 4 2.0 1981-85
NUMBER T40001
Extractor (Puller) VW
For the camshaft phasing gear with 5 and 6 spokes 6 cylinder engines TDi, engines V6 and V8, AUDI A 4, A 6, A 8 Plus Extraction Hook for the careful extraction of camshaft phasing gear with 5 spokes on VW Audi V8 carburetor engines. Puller set used to remove camshaft sprockets Audi VW camshafts. Applicable: , AUM, AUX, AUG, AWV, AWW, AEB, AHA, AKB, ALH, APB, APH, ART, ATC, ATQ, ATW, AWD, AWM, AWN & AWP Pulling arms 17 and 23mm. This info is available in your factory manual or online.
Camshaft sprockets on these engines are often interference-fit or tightly secured, so a standard puller won't work safely —this OEM-style tool (or equivalent) is recommended in factory service manuals to avoid issues during timing work.
We were the first to bring this tool to eBay more than 20 years ago.
NUMBER CLU-SUBARU3
Three Clutch Tools for Subaru Made in the U.S.A.
ON SALE!
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, or foreign and domestic auto repair shops.
The only clutch alignment tools with "U.S.A." stamped on every handle.
Pictures are for reference only
Quality Tools. Durable, long lasting and inexpensive.
Some applications include the following: (and many more models)
Model Cyl Ltr Year
Subaru 1800 Sedan/Wagon (2WD Turbo) 4 1.8 1985-89
Subaru 1800 Sedan/Wagon (4WD Turbo & Non Turbo)) 4 1.8 1985-89
Subaru Baja 4 2.5 2003
Subaru Forester 4 2.5 1998-03
Subaru Impreza 4 2.0 2000-03
Subaru Impreza (4 WD) 4 1.8 1993-97
Subaru Impreza, Outback 4 2.2 1996-02
Subaru Impreza, Outback 4 2.5 1997-03
Subaru Legacy 4 2.2 1990-99
Subaru Legacy 4 2.5 1997-04
Subaru Loyale (4 WD) 4 1.8 1990-94
Subaru WRX 4 2.0 2000-02
Subaru XT (2WD Non-Turbo) 4 1.8 1985-91
Subaru Xt (4WD Turbo & Non Turbo)) 4 1.8 1987-91
Subaru XT6 6 2.7 1988-91
NUMBER 4491-DP
Rare Thin Wall 22mm deep cut-away Socket
Dont risk damage to your injectors using a regular socket. This tool will make it a breeze to remove your injectors. It will allow you to get the injectors out with the short tails of injector return lines still attached. Made with chrome vanadium for extra strength and durability. Application Engine 1.Mercedes OM606 engine 1995 E300D 124.131 3.0 L6 DIESEL 606.910 1996 E300D 210.020 3.0 L6 DIESEL 606.912 1997 E300D 210.020 3.0 L6 DIESEL 606.912 1998 E300D 210.025 3.0 L6 DIESEL 606.962 1999 E300D 210.025 3.0 L6 DIESEL 606.962 2.Mercedes-Benz OM605 engine 97–1998 W210 E 250 Turbodiesel 1995–2001 W202 C 250 Turbodiesel 1996–1998 W210 E 250 D 1993–1996 W124 E 250 D 1993–1995 W202 C 250 D 3.Mercedes-Benz OM604 engine 1996–1998 W210 E 200 D 1996–1998 W202 C 200 D 1996–1998 W210 E 220 D taxis 1995–1998 W210 E 220 D 1996–1998 W202 C 220 D taxis 1996–1998 W210 E 200 D
NUMBER 4491-M28
28mm Diesel Injector Socket Tool
Especially for some Chrysler Alfa Romeo Rover Mann 2,5 TD
- Diesel injector socket 28mm
- Sturdy 1/2 Inch drive - Impact quality
- For removing diesel injectors without damage to fuel lines, except for TDI.
This open socket with cut-away design is to allow for
the easy removal and installation of the strut assembly.
It makes the job easier by holding the nut while
the strut shaft is turned with an Allen wrench (not included).
MK-V604-4
4 Piece Shortie Hex Tools
Stubby Set includes 12mm, 14mm, 17mm & 19mm Sockets
Short Hex Tools Sockets especially for working on European cars BMW Vw Audi Porsche
Stubby Hex Allen Socket Set Tools Each tool is only 28mm Long 3/8 drive size.
Sturdy compact -One Piece design.. Satin Chrome with black impact tips.
Fully Heat Treated S2 Alloy Steel- some of the strongest drivers available!
Comes on a rail.
Picture is for reference only.
NUMBER 600HEX7
Stubby Hex Socket Set Size 7mm
High quality tool made in Japan!
Impact quality short socket 1/4 drive size.
This tool is one inch long.
Sturdy compact One-Piece design
S2 Alloy Steel. Fully Heat Treated to 56 to 62 RC - some of the strongest drivers available! For working in confined areas, bicycles, motorcycles or cars.
Great for tight engine bays on VW, BMW's and other European vehicles
NUMBER MK-V8WR8
Thin Jaw, Big-mouth wrench with extra-wide opening jaws and short handle for access in confined areas. Extra-wide opening jaws with shorter handle for maximum access in confined areas. True ergo design, with thermoplastic handle and larger grip width.
45% wider opening and 45% and thinner jaw
Length (Inches) : 8
Maximum Jaw Opening (Inches) : 1 1/2
Head Thickness (Inches) : 11/64
Jaw Tip Thickness (Inches) : 1/4
NUMBER 30709
9" Ratcheting Slide Wrench
Multiple sizes in one tool - adjusts from 5/16 (8mm) to 1 inch (25mm)
Pivoting flex head locks into position for 180º of flexibility
Ratchets for quick removing and tightening
Knurled thumb wheel adjusts sizes easily
Heavy duty chrome molybdenum construction
Low profile head for tight spaces & Meets or exceed ANSI for torque.
NUMBER W5207
285-Piece Multi-Purpose Electrical Repair Kit
A comprehensive "all-in-one" solution designed primarily for automotive, marine, and home electrical maintenance.
Popular for DIY-ers and mechanics because the case folds open 180°, providing easy access to both the tools and the organized compartments of terminals.
What's Inside the Kit?
Essential Tools:
Wire Crimper/Stripper: A multi-purpose tool for cutting, stripping insulation, and crimping terminals.
6-12V Circuit Tester: Used to check for power in automotive fuses and circuits.
Screwdrivers: Includes both Phillips and Slotted heads.
Test Leads: 32-inch leads with alligator clips for hands-free testing.
Electrical Accessories: A 30-foot roll of electrical tape and a fuse puller.
Electrical Consumables:
Terminals (160 pieces): A large assortment of ring terminals, spade terminals, butt connectors, and quick-connects (male/female).
Fuses: Includes both ATO (blade style) and AGC (glass tube) fuses.
Wire Management: Cable ties (4", 6", and 7.5"), wire clamps, and rubber grommets.
Connection/Insulation: Wire nuts (assorted sizes), heat shrink tubing, and a small roll of primary wire.
NUMBER 3400
Special Spline Socket
For Alternator Pulley Center Bolt Removal on the Audi A4, some BMW's and Mercedes VW Passat and VW Jetta with alternators that have clutches and are free spinning preventing the alt. pulley bolt from being removed easily.
Fits alternators including some VW Audi, BMW, Ford, Mercedes, Porsche, Renault, Skoda. The VW number for this socket is 3400 and Porsche reference number for this tool is 2592.
NUMBER NUMBER 2600MK
Counter-holder tool for crankshaft pulley (harmonic balancer or damper) to prevent rotating while you loosen or tighten the central retaining bolt.
This is essential during: Removing/installing the crankshaft pulley
Timing belt/chain service, Accessory drive belt replacement,
and other front-end engine work requiring high torque on the crank bolt.
Without a counter-holding tool, the pulley would spin freely, making it nearly impossible to apply the required torque (often 200+ Nm on these engines). Compatibility: some Ford 1.8L, 2.0L, 2.3L,
and some 2.5L 16V Duratec chain-drive engines.
Other common applications include:
Ford Focus (1998–2011)
Fiesta (1995–2012)
Mondeo (1993–2015)
C-MAX/Focus C-MAX (2003–2015)
Galaxy/S-MAX (2006–2015)
Transit (2006+ variants)
This also fits some Volvo models (e.g., S40, V50, C30, S80)
due to shared Ford-Volvo engine platforms.
This design features a flat bar with the multiple holes that engage the spokes on the crankshaft pulley for leverage, often used in conjunction with Long wrench, a breaker bar or ratchet for counter-torque.
XZN Tools 11 Piece Set
Number MK-XZN11PC
11 Piece Triple-Square Bit Set XZN style.
You get five long and five short bits plus a holder.
Both Long & short sizes include M5, M6, M8, M10 and M12.
Each LONG bit is 3 inches long.
Each SHORT bit is 1.25 inches long.
Heat treated alloy steel. The bits have 3/8 inch shaft.
The adapter is a 1/2 drive (1/2 x 3/8) .
3400XT50
NUMBER HINO3901
Small Engine Repair Kit
Valve Spring Compressor set Motorcycle tools.
Fits a wide range of valve spring sizes and automotive, motorcycle and small engine applications and comes with multiple extension rods and collet adapters.
5 x push adapters (16mm, 19mm, 23mm, 25mm, 30mm),
3 x extension screws (3’’, 4.4’’ & 4.4’’), 1 x C-type jaw and 1 x 4’’ hand lever,
the length of each collet is 1-3/4’’, max jaw opening is 9-1/2’’.
Note: This also comes with a brand new set of (2) Wood Lappers.
M0109
M0109 33pt Injector Pump Socket
Special serrated socket
33 point serrated socket for Mercedes injection pump repair
For installing and removing the pressure valve holder on the MRSF-ERE injection pumps
MB diesel engines 601, 602, 603, 605, 606, 615, 616, 617, 1982 and up
1/2 inch drive, with an overall length of 2.18 inches.
Same as Benz ref tool # 617-589-0109-00
NUMBER 4655TN
8 Piece cup rocket set is specially designed to install o-rings smoothly and easily,
eliminating damage to the o-ring cylinders.
9/16"(14.4mm-16.0mm);
5/8"(15.9mm-17.5mm);
11/16"(17.5mm-19.1mm);
13/16"(20.7mm-22.MM)
7/8"(22.4mm-24mm);
15/16"(24.0mm-26.0mm);
1.0"(25.5mm-27.5mm);
1-3/16"(30.3mm-32.3mm)