Signed in as:
filler@godaddy.com
Cam Pulley Holder
NUMBER 89028
cam pulley holder (also called a camshaft pulley holder or cam sprocket holding tool). It's a specialty automotive tool designed for engine timing belt/chain work on overhead cam (OHC) engines. This holds the camshaft gear/sprocket (or sometimes an injection pump pulley) stationary so you can loosen or tighten the center retaining bolt without the pulley spinning. This is essential during timing belt replacements, camshaft work, or related service to avoid damaging components or losing timing alignment. Features grooved or pinned ends that fit into holes or slots on many cam pulleys for a secure grip.
Long handle (often with a non-slip/rubberized grip) for good leverage.
Durable steel construction.
This tool is especially popular for Japanese vehicles and works well on:Many Toyota models (e.g., Camry, models with V6 engines like the 5VZ-FE)
Nissan (e.g., Maxima, various V6 engines)
Mazda. Other OHC engines from various makes that have accessible pulley holes/slots.
Fold-out File Set
NUMBER 90266
Ultimate 12 pc. Needle File Fold-up Set Auto Tools
Needle File Fold-up Set Auto Tools
12 Files all in One set!
For precision filing delicate parts.
Multi-tool Sheath
NUMBER MK747SH
Multi-tool Sheath For Belt
Leather EDC Pocket Organizer W Pen Holder
Size: 7.09 x 5.31 inch.
Flashlight known to fit up to 0.91 inch diameter flashlights
Accepts normal sized key rings
Flashlight Pocket-9.5cm X 3.5cm; Pen Pocket-9.5 cm X 2.5cm; Multitool Pocket-11cm X 5.3cm
(multi tools not included).
Lip Seal Puller
NUMBER LSP-1
Works better than all other pullers available on the market for import car lip seals.
Works best on front cam and crank seals. Has no moving part to adjust, making seal removal a snap. Slim, ergonomic design fits into tight areas. Will not damage shaft journals or seal housings if used properly. Most pullers available either require adjustments to set the tool up, or are just too large to fit into the seal lip without risk of damaging the shaft journal, and some will just not fit into the work area, period! Why spend extra time fighting the seal and the tool, with this NEW seal puller, front engine seals become a snap. Simply insert the hook into the seal lip, spray the seal with silicone lubricant, pry outwards and you're done!! Stainless Steel Blade / 2 Component Handle. The Puller is slim and the unique design makes pulling even the most difficult to access seals a snap, (V6 Camry lip seals, anyone?). Combine this tool with a dousing of silicone spray and the seals pop right out
It's praised in mechanic circles for being more effective than many generic seal pullers on import lip seals.
Mini Bulb Pliers
NUMBER 1012
This is a special automotive tool designed for safely removing and installing small light bulbs, especially in tight or hard-to-reach spots like dashboard lights, license plate lights, instrument clusters, or other recessed automotive bulbs. Features: Gently grips the glass shell of the bulb without breaking it
Works with various bulb types: bayonet, screw base, wedge base, and even heated bulbs
Cup-type or circular gripping ends for secure hold
Scissor-style design for easy one-handed operation
Angled/slim profile to fit into confined spaces
Great for hot bulbs (prevents burns) or broken/corroded ones.
Brake Bleeder Wrench Set
NUMBER BB500-00
Brake Bleeder Wrench with angled double box end features dual offset for easy valve access. One box end has 45-degree offset and the other has 75-degree offset. 6-Point WaveDrive box end transfers torque uniformly and prevents damaging and rounding of the bolt. It is constructed of strong and durable premium Chrome Vanadium steel and finished with our own MaxChrome protective plating for enhanced durability and corrosion resistance.
Extra Long Torx Drivers
NUMBER TD-1200
6-piece extra-long Torx screwdriver set designed for reaching fasteners in tight or recessed areas, commonly used in automotive, motorcycle, or industrial work.Key FeaturesBlade length: 12 inches (extra long/XL for hard-to-reach spots)
Total length: Approximately 16 inches (including handle, based on similar listings)
Sizes included: T10, T15, T20, T25, T27, T30 (covers common Torx sizes. Black tips; easy-grip 2-component handles for comfort and torque
Precision fit for Torx fasteners, durable for professional use.
This set is for tasks needing extended reach, like under-dash work, engine bays, or electronics.
NUMBER 2244-00
10pc set of reduced shank hex bit sockets ideal for use on hard-to-reach fixings
Set includes 5, 5.5, 6, 7, 8, 10, 11, 12, 13, 14mm hex key bits
Reduced shank diameter for greater access, ideal in tight areas
1/4"Drive socket bits: 5, 5.5, 6, 7, 8mm. Length: 87mm
3/8"Drive socket bits: 10, 11, 12, 13, 14mm. Length: 93mm
Sockets manufactured from chrome vanadium steel, with polished chrome finish
Bits made from impact-grade S2 steel
Adjustable Camshaft Pulley Holder
NUMBER 4333-00
Adjustable Master Camshaft Pulley Holder
Spring-loaded design for setting pins in variable positions
Grooved pins hold the camshaft pulley stationary while loosening and tightening the center shaft bolt
Applications include:
Mercedes Benz, BMW, Ford, Honda, Audi, VW, Subaru, Nissan, Volvo, Toyota, Mitsubishi, Chrysler and more
Especially useful for transverse mounted V6 engines, including:
VG30 (Nissan Maxima) & the 3VZFE and 1MZFE (Toyota Camry)
Tire Depth Gauge
NUMBER 1TDG-00
ON SALE BOGO
Buy one get one free!
TIRE DEPTH GAUGE COLOR CODED FOR EASY IDENTIFICATION OF WORN OUT TIRES.
THE GREEN PORTION INDICATES THAT THE TIRE IS GOOD AND CAN CONTINUE TO BE USED.
THE YELLOW SECTION SHOWS THAT THE TIRE IS WORN AND NEEDS TO BE REPLACED SOON.
THE RED PORTION SHOWS THE TIRE SHOULD BE REPLACED IMMEDIATELY.
THE TOTAL LENGTH OF THIS GAUGE IS 3 -1/2 inches
FLEX HEAD WRENCH
NUMBER HBR112-00
FLEX HEAD RATCHET
The smallest, lowest profile head in the industry! The quick disk on the drive head allows for quick tightening or loosening of fasteners when ratcheting is NOT required. Reversible 72 tooth gear head requires only 2 degrees of sweep. Made of polished chrome, heat treated alloy steel.
Works with all 1/4"; Hex Bits and 1/4 Drive Sockets
One end fixed, the other end pivots between 180°
One end fixed, the other end pivots between 180°
Includes 1/4"; Square Drive Insert
Limited Lifetime Warranty.
Locking Wobble-Fix Extension Bar Set
NUMBER 2IN-TRI55
KOKEN 3 PIECE WOBBLE EXTENSION SET
MADE IN JAPAN
3/8" Sq. Dr. Locking Wobble-Fix Extension Bar Set – 3 Piece
The Wobble-Fix Extension Bar Set combines precision engineering with enhanced versatility, offering two distinct modes for secure socket control. Designed for demanding workshop conditions, these extension bars ensure both stability and flexibility—whenever you need it.
Each bar features the innovative Wobble-Fix mechanism, allowing you to choose between:
- Fix Mode: The socket is held firmly and precisely in line with the drive, eliminating movement for accurate torque transmission. In this mode, the socket cannot be detached from the drive, ensuring maximum security during high-torque applications.
- Wobble Mode: The socket can pivot freely up to 15°, providing improved access to fasteners in confined or awkward spaces. Once in Wobble Mode, the locking mechanism prevents the socket from being pushed back into Fix Mode, ensuring consistent operation and preventing accidental mode changes during use.
Manufactured from premium chrome vanadium steel with a mirror-polished chrome finish, these extension bars deliver exceptional strength, durability, and corrosion resistance.
Set Includes:
- 75 mm Extension Bar
- 125 mm Extension Bar
- 250 mm Extension Bar
Key Features:
- Dual-function Wobble-Fix design for either rigid or flexible operation
- Locking mechanism prevents unintentional mode change or socket release
- Up to 15° working angle for improved accessibility
- Chrome vanadium steel construction for superior durability
- Mirror-polished finish for easy cleaning and professional appearance
Ideal for automotive, industrial, and maintenance applications, this set gives you the confidence of a locked connection with the flexibility to reach every fastener.
Ball End Screwdriver Hex Bit Set
NUMBER 2IN-7BHX
7 Piece Ball End Screwdriver Bits Set
Overall length: 2.55 inch (65mm)
Ball End Hexagon, shank: 6.35mm/ 1/4-inch Hex Shank
Ball End Hexagon Head
Size: H2.5, H3, H4, H5, H6 Magnetic
Ideal with power tools for screwdrivers, air drills etc
Made of S2 alloy steel for long life
Pentagon Head Screwdriver Bits Set
NUMBER 2IN-5PENTA
5pc Magnetic Pentagon Head Bit Set
5 sided Security Screwdriver Bits 1/4 drive
These are Security (Tamper Proof) Pentagonal-Drive Bits
Five-sided "Penta" Drive Bit Set includes sizes H3/H4.3/H6.7/ H7/ H7.6 for a wide variety of applications, length 50mm magnetic, Tamper Proof security head can quickly and efficiently grab the screws, preventing them from dropping and slipping, providing more work efficiency.
5Pc Triangular Head Bit Set
NUMBER 2IN-TRI5
Bit Set 5 Tools
Triangular screwdriver bits (also known as triangle head bits or TA bits).
They are a set of 1/4-inch hex shank driver bits designed for screws
with a triangular recess in the head.
The sizes shown (from left to right) are:
TA1.8 (1.8 mm),TA2.0 (2.0 mm),TA2.3 (2.3 mm), TA2.7 (2.7 mm), TA3.0 (3.0 mm)
Made of S2 steel, magnetic, and 50 mm (2 inches) long.
These bits are used for tamper-resistant triangular screws (sometimes called TP3 or tri-lobe screws), Sometimes used in small household appliances and electronics (e.g., die-cast models etc) Battery compartments, Precision instruments or other items where manufacturers want to discourage casual disassembly. The triangular shape provides tamper resistance since standard screwdrivers (like Phillips or flat head) don't fit well, though a flat head can sometimes work in a pinch on smaller sizes.
NUMBER XZNM8-TOY
Socket Set 2 Tools
Heavy Duty M8 XZN Tool for Toyota
12 Point tool (XZN) 8mm
Sturdy 1/2 inch Drive
This tool is 4 inches long.
Made from high-grade steel with a matte finish
for enhanced durability and corrosion resistance
M1725
M1725
Dash & Ignition Tool Kit for Mercedes
Stainless steel tools for the easy removal of BMW and Mercedes
Models: W107, 123, 124, 126, 129, 140, 201
This 8-piece tool kit contains
- Ignition Lock Removal Pins - 124, 126, 201
- Dash Hooks -107, 116, 123, 124, 126, 140, 201
- Radio Removal Keys - 129, 140, 202, 210.
NUMBER W1351
15 Piece Ratchet , Bit and Socket Set
Set Includes 6 each 1/4 drive 6 point sockets sizes 3/16, 1/4, 5/16 plus 6, 7, and 8mm.
Also included are 6 screwdriver bits 2 slotted ( 3/16 and 1/4) 3 Phillips (#1, 2 and 3)
plus a 1/4 Dr Hex adapter.
You can use the 6, 7 and 8mm hex sockets for hose clamps on German cars and many other applications.
This is a small set you can easily keep in your car, trunk or tool box.
Comes in a blow molded case.