NUMBER Grab Bag#1

NUMBER CL2500-05 

Five (5) Piece Impact Driver and Bit Set

CIC Impact driver with four (4) bits comes in a compact blue metal case and instructions. The dimensions of the four bits are:

1.  #2 Phillips 2 x 36mm

2.  #3 Phillips 3 x 36mm

3.  Flat, 5/16 inch (8.25mm) x 36mm

4.  Flat, 3/8 inch (9.55mm) x 36mm

The CIC Impact Driver with four (4) bits is a classic manual (hand-held) impact driver — a hammer-struck tool designed for loosening or tightening stubborn screws, bolts, or fasteners where regular screwdrivers fail due to rust, overtightening, or high torque needs. It's not a powered/cordless electric impact driver, but a mechanical one that uses hammer strikes on the handle to deliver rotational impact force.CIC (a Taiwanese tool brand, often associated with automotive, motorcycle, and general repair tools) 

NUMBER AES330

10-piece Master Spray Gun Cleaning Kit 

(model AES-330) designed specifically for thoroughly cleaning paint spray guns,

including various types such as gravity feed, HVLP (High Volume Low Pressure), suction feed, detail/touch-up, pressure, and even airbrushes. 

The kit includes a selection of specialized brushes with natural bristles, wire handles, and different shapes/sizes to reach internal tubes, nozzles, air caps, 

fluid passages, and exterior surfaces. Key features :Safe for use with harsh solvents, chemicals, and acids.

Helps maintain optimal spray performance by removing dried paint residue.

Brushes can also be used with all types of paint strainers.

NUMBER CL-MINI22

Set Two Miniature Tools

Miniature / micro flush cutter (also called a precision wire cutter, side cutter, or nippers), specifically a compact model designed for delicate, close-to-surface cuts.The tool has a black plastic body/handle with a spring-loaded or simple pivot mechanism, and it features a small, exposed triangular or angled metal blade (often carbon steel or similar) on one side for making very clean, flush cuts right up against a surface. Common Uses Cutting small wires (e.g., electronics, jewelry making, component leads on circuit boards)

Trimming zip ties flush.

Plus compact handheld mini level (often called a pocket level or mini torpedo level). With traditional bubble vial leveling common in budget/compact models for indoor use).

Bubble vial — there's  one vial (horizontal/vertical) visible through the window/slot. 

You get both items with this purchase.

NUMBER CL2040X4  

BOGO DIN RADIO REMOVER TOOL SET (4 pcs) for some old VW Ford

Disengages retaining clips on Ford and most imports for easy, damage-free removal.

• Applicable: all late model Fords with a DIN chassis radio mount.

• Use for some VW, Audi, Ford.

Details:  This special U shaped tool is required if you need to take your radio out. 

These are normally sold in pairs. You will need 2 pairs of these if you have a double height (double DIN) radio.

Old tool number was 2040

Fits: VWs before 1998 with DIN or double DIN sized radios.

Buy one pack, get the other pack FREE. 

You get FOUR pieces total with this purchase.

NUMBER CL-DP502

"Top Ten Drain Plug Assortment" with 10 pieces total. 

This is a popular universal/engine oil drain plug kit was designed for mechanics/DIYers to cover the most common stripped, damaged, or missing oil drain plugs across many vehicles — including many Toyota's, Honda's, domestics, and imports.These are replacement oil drain plugs (with some including or paired with gaskets/washers in the tray). 

Key features:Variety of thread sizes and styles — "regular point" (standard tapered/conical tip for sealing), "dog point" (flat or blunt end, often for better centering or specific applications), oversized/machined variants (for repairing stripped holes by tapping larger threads without inserts).

Includes both metric (e.g., M14x1.50, M12x1.75, M16x1.50, M18x1.50, M20x1.50) and SAE/English (e.g., 1/2"-20) threads.

Some are "oversized" or "double/triple oversized machined" — these are for fixing stripped oil pan threads by cutting new, slightly larger threads (a common repair instead of helicoil or time-sert inserts).

Heads are hex-style (for wrenching), some with integrated washers or crush features.

Finishes: Plain, zinc-plated, and machined for corrosion resistance.